Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Universal City, TX

Screw Drive Opener Repair in Universal City, TX

Screw-drive openers cleaned, lubricated and repaired. Typical cost $125-$350.

Need screw drive opener repair in Universal City, TX? We diagnose the problem, give you a price before any work starts, and finish most jobs in a single visit. Screw-drive openers cleaned, lubricated and repaired.

Is it time for screw drive opener repair?

  • The motor runs but the door doesn't move
  • Squealing from the rail
  • Slow or jerky travel, especially in cold weather

Why this happens

  • Worn trolley or coupler
  • Dry or dirty screw rail
  • Temperature swings affecting the rail

Before the technician arrives

  • Look for grime and dried grease along the threaded rod.
  • Only use the lubricant the manufacturer recommends for the screw rail.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle screw drive opener repair

  1. Inspect the screw, trolley and motor coupler
  2. Clean and lubricate the rail
  3. Replace worn trolley or coupler parts
  4. Set the limits and force
  5. Test the opener

Typical screw drive opener repair prices

$125-$350Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Serving Universal City, TX and nearby towns

A closed garage in a Texas summer gets very hot, which shortens the life of opener circuit boards, capacitors and photo-eye sensors. Storms add power surges, so a surge protector is cheap insurance.

Technicians serve all of Universal City (ZIP code 78148), plus Schertz (1.3 mi), Converse (2.6 mi), Selma (2.7 mi) and Live Oak (3 mi). Call (833) 435-8883 to book a visit in Universal City.

Screw Drive Opener Repair: frequently asked questions

How much does screw drive opener repair cost in Universal City, TX?

Screw Drive Opener Repair typically costs $125-$350 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do screw drive opener repair the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is screw drive opener repair covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Texas or Universal City requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Universal City, TX

Raynor Garage Door Panel Replacement

Raynor, based in Dixon, Illinois, makes residential and commercial garage doors as well as openers.

Typical $300-$900

Midland Garage Door Garage Door Installation

New steel, insulated, wood-look and carriage-style doors, measured and professionally installed.

Typical $1,200-$4,500

Northwest Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Ryobi Garage Door Opener Installation

Ryobi's garage door opener can use the brand's 18V ONE+ batteries as backup power and has accessory ports for add-ons.

Typical $350-$800

CHI Overhead Doors Rolling Steel Door Repair

Rolling steel service doors, curtains, guides and springs repaired.

Typical $300-$1,500

Amarr Weather Seal Replacement

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $100-$300

Garage Door Tune-Up & Maintenance

A full inspection, lubrication and adjustment to prevent breakdowns.

Typical $90-$200

Commercial Door Operator Repair

Trolley, jackshaft and hoist operators repaired and adjusted.

Typical $300-$1,200

Martin Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Garaga Off-Track Garage Door Repair

Garaga is a Canadian garage door manufacturer based in Quebec.

Typical $175-$450

CHI Overhead Doors Garage Door Panel Replacement

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $300-$900

Northwest Door Garage Door Repair

Diagnosis and repair for doors that are stuck, noisy, crooked or won't open or close.

Typical $150-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Universal City, TX now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote